Tatamagouche Tent Repair Tape, Grid Fiber Tape, the new type of repair tape is a selfmelting, from-shaped good Tatamagouche electrical insulation and waterproof sealing tape. It can be used in electrical insulation and waterproof sealing and other occasions. rated working temperature is 90 ℃, and the emergency overload temperature is 130 ℃. The CTN-03 tape gas pipeline provides reliable waterproof sealing excellent anti-ultraviolet protection. Matching with irradiation cross-linked polyethylene cable repair plate as the outer protective layer, it can provide reliable [prov_orcity] waterproof sealing and excellent anti-ultraviolet protection for the tent.

Tent Repair Special Adhesive Tape Strong Adhesion Rain Cloth Truck Sticking Can Knife Scraping Cloth Repair Tent Waterproof Tape

Tensile strength: ≥8N/10mm

· Breaking elongation ≥1200%

· Adhesion: 5N/10mm for steel plate, 5N/10mm for polyethylene, layer coverage

· Dielectric strength: 18 kv/mm

· Working temperature: 90 ℃

· [prov_or_city Tent Repair Tape water vapor permeability: 0.1g/100in2/24hr

· Heat resistance cracking: no crack at 10 ℃/1h

· Anti-ozone performance concentration: 0.03%, no crack at 3h

· First use a wet to clean the dust and other impurities on the surface of the cable.

· Use a towel to wipe the surface of the cable with alcohol, and use a blowtorch to the water vapor on the surface of the cable.

· Tatamagouche stretch the tape to about 3/4 of the original width, so that coating layer with adhesive faces the surface of the cable to be wound, and wind it at a rate of about 50% overlap.

· The starting and ending points the tent repair tape should extend 30-50 mm beyond the edge of the joint.